Quick foam soap dispenser
Equipped with high-precision infrared sensor, soap could be foamed and dispensed in 0.25 second. Less time is taken to get a quick hand cleaning.
Move hand to sensor area and get soap. Keep hands cleaner with less contact than using a pump bottle.
It is vey important for the elderly and children in such a special period.
Rechargeable soap dispenser
With 800 mAh built-in battery: A single charge could work for about 3000 times.
Compare with battery operated dispensers, it reduces battery consumption, saves more money.
A charging socket designed with rubber plug protects soap dispenser from moist that may hurt inside components.
What soap should you use?
You could use both foam soap and liquid soap with our soap dispenser.
Use foam soap directly or dilute liquid soap with 4 times water, you could get perfect foam.
Besides you could use shampoo, face cleaner, dish detergent, don't forget to dilute it with water, and do not use those detergent with solid particles, or it will block this soap dispenser.
There are 3 soap amount for your option.
Single press Power button, the indicator will flash in different colors to remind you of output soap amount.
- White indicator: High amount mode, you get 18g foam each time.
- Blue indicator: Mid amount mode, you get 1g foam each time.
- Green indicator: Low amount mode, you will get 0.6g each time.
DO& DO NOT:
DO take out the hand soap, refilling water and get water out for 10 times to avoid blockage caused by drying hand soap in the pipe if you are going to put it aside for long time.
DO add warm water and pump water out for a few times before each refill, regular clean will help to extend its working life.
DO NOT immerse the dispenser in water or rinse it, or it will short circuit.
DO NOT tilt the tank when installing or replacing hand soap.
DO NOT use hand soap or other soap that contains solid particles.
DO NOT invert the dispenser.
DO NOT block the foam outlet with your hand.
DO NOT add liquid/gel soap into the right foam soap reservoir, it won’t foam and may block the pipe.
1. It doesn't foam, I could see indicator light up and hear the working sound, but no foam, what could I do?
----Please check soap outlet and tube, make sure nothing clog them. Then fill the soap reservoir with water and wave hand to get water out. It will test soap passage and also help to clean the passage. If it doesn't work, please contact the seller.
2. When I move hand to sensor area, the indicator get red and won't foam.
----Please clean the sensor, restart the dispenser and try it again. Contact seller if it doesn't work.
3. I press power button but it doesn't turn on! No indicator light up!
----Please charge it for 2 hours before first use or when it doesn't turn on. If it still does not work after full charge, please contact seller for help.
4. I lost pipe/ The soap reservoir got broke/.... Please feel free to contact seller.